Click image to view full size image
1.Usage
It is special for processing aluminum and copper bus bars.
2. Main features:
CNC Bus bar processing machine combines punching, bending and cutting together as well as some other functions such as embossing, twisting, flattening, pressing tie-in, etc.
(1)Cutting unit:it uses punch shearing,the incision interface is flat,no droop and burrs and waste,beautiful shape.
(2)Punching unit:uses an united six-mode turn plate in tooth shape to make sure the upper mold and the lower mold are absolutely in the same center,improving the mold concentricity and longtening the working life. The turnplate is in tooth shape with good view and high strength. No need to frequently change molds, labor intensity is highly reduced. It is easy and quick to use.Producing efficiency is obviously higher than a traditional one.
(3)Bending unit:
?CNC PLC control system,just input a angle on the touch screen, it can be bending automatically.Angle bending accuracy: +/- 1°
?double worktable.ensures three unit can real working at the same time.
3. Technical parameters:
|
|
| ZTMX-303K | ZTMX-503K |
| Punching | Max power (KN) | 300 | 500 |
| Punching Diameter (mm) | Ф4.3-Ф25 | Ф4.3-Ф34 | |
| Max thickness (mm) | 12 | 16 | |
| Max width (mm) | 150 | 250 | |
| Shearing | Max thickness (mm) | 12 | 16 |
| Max width (mm) | 150 | 250 | |
| Bending | Max power (KN) | 300 | 500 |
| Max width (mm) | 150 | 250 | |
| Max thickness (mm) | 12 | 16 | |
| Vertical Bending | Max width (mm) | 100(10mm thick copper) | 120(12mm thick copper) |
| Min. bending angle degree | 90° | 90° | |
| Embossing |
| √ | √ |
| Pressing Cable Joint |
| √ | √ |
| Twisting |
| √ | √ |
| Outline Dimensions |
| 1300x1000x900 | 1500x1345x900 |
| Main motor power (KW) |
| 3×4 | 3×5.5 |
CNC Turret bus bar bending cutting punching machine
